BS EN 10028-5-2009 Flat products made of steels for pressure purposes Part 5 Weldable fine grain steels, thermomechanically rolled
|
ID： |
2CF216D875A846C0AD441491C975B997 |
|
文件大小(MB)： |
0.27 |
|
页数： |
18 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BS EN,10028-5:2009,ICS 77.140.30; 77.140.50,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW,BRITISH STANDARD,Flat products made,of steels for pressure,purposes,Part 5: Weldable fine grain steels,thermomechanically rolled,This British Standard,was published under the,authority of the Standards,Policy and Strategy,Committee on 31 July,2009.,. BSI 2009,ISBN 978 0 580 64188 6,Amendments/corrigenda issued since publication,Date Comments,BS EN 10028-5:2009,National foreword,This British Standard is the UK implementation of EN 10028-5:2009. It,supersedes BS EN 10028-5:2003 which is withdrawn.,The UK participation in its preparation was entrusted to Technical,Committee ISE/73/2, Steel plates and bars for pressure purposes.,A list of organizations represented on this committee can be obtained on,request to its secretary.,This publication does not purport to include all the necessary provisions,of a contract. Users are responsible for its correct application.,Compliance with a British Standard cannot confer immunity,from legal obligations.,BS EN 10028-5:2009,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10028-5,June 2009,ICS 77.140.30; 77.140.50 Supersedes EN 10028-5:2003,English Version,Flat products made of steels for pressure purposes - Part 5:,Weldable fine grain steels, thermomechanically rolled,Produits plats en acier pour appareils à pression - Partie 5:,Aciers soudables à grains fins, laminés,thermomécaniquement,Flacherzeugnisse aus Druckbeh鋖terst鋒len - Teil 5:,Schwei遟eeignete Feinkornbaust鋒le, thermomechanisch,gewalzt,This European Standard was approved by CEN on 14 May 2009.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the CEN Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the,official versions.,CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: Avenue Marnix 17, B-1000 Brussels,. 2009 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 10028-5:2009: E,BS EN 10028-5:2009,EN 10028-5:2009 (E),2,Contents page,Foreword 3,1 Scope . 4,2 Normative references .. 4,3 Terms and definitions . 4,4 Dimension and tolerances . 4,5 Calculation of mass .. 4,6 Classification and designation 4,6.1 Classification . 4,6.2 Designation 5,7 Information to be supplied by the purchaser 5,7.1 Mandatory information 5,7.2 Options . 5,7.3 Example for ordering 5,8 Requirements 5,8.1 Steelmaking process 5,8.2 Delivery condition .. 5,8.3 Chemical composition 6,8.4 Mechanical properties . 6,8.5 Surface condition 6,8.6 Internal soundness 6,9 Inspection 6,9.1 Types of inspection and inspection documents . 6,9.2 Tests to be carried out 7,9.3 Retests .. 7,10 Sampling .. 7,11 Test methods . 7,12 Marking . 7,Annex ZA (informative) Relationship between this European Standard and the Essential,Requirements of EU Directive 97/23/EC . 13,Bibliography . 14,BS EN 10028-5:2009,EN 10028-5:2009 (E),3,Foreword,This document (EN 10028-5:2009) has been prepared by Technical Committee ECISS/TC 22 “Steels for pressure,purposes - Qualities”, the secretariat of which is held by DIN.,This European Standard shall be given the status of a national standard, either by publication of an identical text or,by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn at the latest,by December 2009.,Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.,CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.,This document supersedes EN 10028-5:2003.,This European Standard consists of the following parts, under the general title Flat products made of steels for,pressure p……
……